Speaker Line Array - Compacta Line Array 2×8" + 1 Tweeter

Design of a Compacta Line Array 2×8" + 1 Tweeter 

This project to be compact line array does not lose in efficiency, Comprising two 8-inch speakers and 200 watts each and great for outdoor or indoor systems, built with MDF or plywood 15mm requires a bit of skill in the art of joinery, with front ducts plays the bass medium very clearly, cover on the back can be 6mm MDF or with a 3mm iron plate where you put the driver and the plugs of the box.

	Base and top panel
	Back cover wirh opening panel
	Walls side panel
	Walls of strengthening internal
	Walls of driver panel
	Walls of pipeline panel
	Front walls of pipeline
	Baffles of speaker
	Back cover

Lihat Selengkapnya

Share

Speaker Line Array - Caixa Vertical Line Array 4×10" + 1 Tweeter

Design of a Caixa Vertical Line Array 4×10" + 1 Tweeter 

The speakers principle is very old, we know that when piled high - speakers column reduced the vertical coverage angle and maintain the dispersion horizontal, thus the acoustic sensitivity is greatly increased, in other words the system speaks much more and much clearer. So that systems can be vertically stacked some conditions must be met. The distance between the radiation centers of the loudspeakers must be at least half the wavelength of any frequency spectrum. At low frequencies all well as the wavelengths are large (eg. 50 Hz 6.8 meters, 100 meters 3,4 Hz 0.68 Hz 500 meters, 1000 meters 0.32 Hz), we found that till 1000 Hz got stack speakers physically columns without major problems.

	Base panel
	Rear panel
	Ribs of sided
	Walls side panel
	Front panel
	Top panel
	Perspective
	Perspective tranparency

Lihat Selengkapnya

Share

Speaker Line Array 2×8 + 2×6 + 1 Tweeter

	Nama Speaker	Gambar Skema
	Line Array  2×8 + 2×6 + 1 Tweeter
2	18"x2 B218a Sub
3	21"x1 Beyma B-03

Lihat Selengkapnya

Share